2
Magnetic door contact with panic button EWD1 is a wireless device with magnetic contact which are used to secure doors, windows
or any other opening parts and operating with ELDES wireless security systems. Users have to bind it to the central device of secu-
rity system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“). When EWD1 is
connected to the system, two wireless zones are added. First wireless zone is used to monitor the magnetic contacts and the second
wireless zone is for managing the panic button. By default panic button zone is configured as Silent zone and in case of violation,
system will cause an alarm to administrator numbers or/and to monitoring station without turning the siren on.
It is possible to connect up to 16 wireless devices to the central security system at a time. Maximum distance for wireless connection
is 150 meters (in open areas).
1. Device Installation
1. Open EWD1 case and insert the battery.
2. Magnetic door contact consists of two parts: a magnet and a sensor. Sensor components are: a mounting part and the sensor.
Magnet components are: a mounting part and the cover.
2.1 Fix the sensor mounting part with two screws on the door or window jamb.
2.2 Fix the magnet mounting part with two screws next to the sensor mounting part on door or window frame. How to fix the
magnetic door contact correctly see Fig. No. 2. The distance between the magnet and the door contact must be no larger
than 20 mm.
2.3 The sensor should be attached to the fixed sensors mounting part. When attaching sensor pay attention to the tamper (micro
switch) - it must be pressed.
2.4 The magnet cover should be attached to the fixed magnet mounting part.
NOTE:
it is not recommend to fix the magnetic door contact other ways than with screws, e.g. with duck tape.
The incorrect ways of fixing magnetic door contact see Fig. No. 2.
Fig. No. 1
Fig. No. 2
3V
CR2032
+
+
MAX 20 mm
Fig. No. 3