92
92
EN
EPIR3 User Manual v1.3
7.4.4. Zone attributes
•
Stay
– If this attribute is enabled, the zone, regardless of type, will not cause an alarm if violated
when the system is Stay armed. For more details on arming the system in the Stay mode, please refer
to section
3.3.5. About STAY mode and how to activate it by EKB3W
.
•
Force
– This attribute determines whether the system can be armed or not while a zone is violated. If
a zone with the Force attribute enabled is left violated until the exit delay expires, it will be ignored.
Once the system is armed and the zone is restored, the violation will not be ignored and the zone will
operate according to the determined type. For more details on zone types, please refer to section
7.4.3. Zone type definitions
.
7.4.5. Zone names
Each zone has a name that can be customized by the user. Typically, the name specifies a device type
connected to a determined zone terminal, for
Example:
Kitchen doors opened
. The zone names are used
in SMS text messages that are sent to the user during alarm. the By default, the zone names are:
Z1 –
Zone1, Z2 – Zone2, Z3 – Zone3, Z4 – Zone4 etc.
ATTENTION:
Space, colon, semi-colon characters, parameter names and/or values, such as PSW,
STATUS, ON, OFF etc. are NOT allowed in zone names.
