elddis 2010 avante, Owner'S Handbook Manual

Page: 60 / 104

9-29
HOW TO USE YOUR CARAVAN’S EQUIPMENT
EXPLORER PROTECT - AUTOWATCH
ALARM SYSTEM (Option only)
Manufactured by Autowatch, The Explorer
Protect system is designed to give years of
trouble free operation. Made with only the
highest quality components and using state of the
art technology you can be assured that your
caravan has the best electronic protection
available.
Each caravan alarm is installed with a Passive
Infrared Detector (PIR), a wireless sensor that
detects movement in the caravan and transmits a
radio signal to the alarm module. If the alarm is
on the siren will sound. A leg sensor, fully sealed
against dust and water, will detect if the corner
stabilising leg is being raised or lowered and
transmits a coded radio signal to the alarm.
Additional sensors can be purchased from your
retailer to enhance security.
See section below for operation or consult the
manufacturers instructions provided in the
Owners Information Pack.
Basic Operation Arming the System
(i) Briefly press (large) arm/disarm button.
(ii) Single chirp.
(iii) Awning light illuminates for 30 seconds.
(iv) Settling time of 15 seconds before
responding to triggers.
(v) Single intermittent flash of status LED (every
2 seconds).
(vi) All sensors triggered will result in siren
sounding for 30 seconds, or until reset by
pressing the arm/disarm button.
Disarming the System
(i) Briefly press the (large) arm/disarm button.
(ii) Double chirp.
(iii) Awning light illuminates briefly on and off and
then on again for 30 seconds.
(iv) LED off.
Panic Alarm
(i) Press and hold the small panic button on the
transmitter for two seconds.
(ii) The siren will sound for thirty seconds,
unless reset by pressing any of the
transmitter buttons.