background image

9-5

HOW TO USE YOUR CARAVAN’S EQUIPMENT

Manual ignition:

1.

Press and hold in thermostat control (B) for
a maximum of 30 seconds.

2.

Press manual ignition button (D) several
times at intervals of 1-2 seconds.

3.

Release thermostat control (B) when the
flame meter (C) red needle enters the green
area of the gauge.

4.

Set thermostat control (B) to required value.

Switching off

Set the energy source selector switch (A) to 

to switch the refrgierator off.

Use the special storage latch on the door lock
mechanism to stop the door closing, preventing
unpleasant odours and mould forming in the
refrigerator.

Turn off gas taps and gas bottle valve.

Maintenance (all fridge variants)

The maintenance requirements for all types of
Thetford fridges are as follows:

Cleaning:

 clean the fridge regularly using a soft

cloth and mild detergent. Dust using a soft
moistened cloth and annually remove dust
from the condenser inside the fridge.

Defrosting:

 defrost the fridge regularly as soon

as the frost layer is 3mm thick.

Door lock: 

check the door lock mechanism

regularly and ensure door closes securely.

Ventilation grilles:

 check regularly to ensure the

grilles are clean and unblocked.

Securing products for driving

One of the racks
in your
refrigerator has a
system for
securing products
during driving.
The system
consists of a
simple click-and-
slide plastic strip.
To secure
products on the
rack while
driving, push the
plastic strip as tightly as you can against the
products on the rack.

In the storage space on the inside of the
refrigerator door, there is the unique Thetford
flexible bottle slide. The slide prevents bottles
from sliding around during driving. Push the slide
against the products in the door or place the
products between the bottle slide.

Door locking mechanism

The refrigerator door has an automatic locking
mechanism. The door locks automatically when
you press it shut firmly. The lock releases
unnoticed when you open the refrigerator with
your hand. This automatic locking mechanism also
keeps the refrigerator door shut during driving.
For some models an additional security device is
fitted below the refrigerator. By pushing the
locking bar over the pin when the door is closed,
you can make doubly sure that the door does not
come open during your journey.

Summary of Contents for 2010 avante









































































































Reviews: