General information
Disposal
Waste electronic equipment must not be
disposed of with household waste!
Dispose of the waste product via collec-
tion facilities for electronic scrap or via
your specialist dealer.
Dispose of used batteries in a recyc-
ling bin for batteries or via the specialist
trade.
Dispose of packaging material in the
recycling bins for cardboard, paper and
plastic.
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro-
duction faults. Any unauthorized tampering with,
or modifications to, the product shall render this
warranty null and void.
Conformity
Hereby, ELDAT EaS GmbH declares that the ra-
dio equipment type STH01 is in compliance with
Directive 2014/53/EU. The full text of the EU de-
claration of conformity is available at the following
internet address: www.eldat.de
Customer service
If the device does not work properly despite pro-
per handling or in case of damage, please contact
the manufacturer or your retailer.
ELDAT EaS GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone: + 49 (0) 33 75 / 90 37-310
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-mail: [email protected]
UM159946A
0621 EN
Battery check
The transmitter has a battery check function,
which checks the capacity of the battery during
the transmission process.
If the capacity of the battery is low, the transmis-
sion LED flashes every 10 minutes for 3 seconds
and a data telegram is transmit.
Replace the batteries as soon as possible.
Replacing the Battery
1. Lever off the transmission group.
2. Replace the battery. Only use batteries of the
type CR2032. Make sure the poling is correct.
The positive pole has to be visible!
3. Replace the transmission group back onto
the catches.
Hinweis
: The coding of the transmiter is preser-
ved even if there is no voltage supply.You do not
need to memorize the code in the recei vers again
after a battery change.
TroubleShooting
If the radio control does not react to the STH01:
- Exchange the battery..
- Check that the wireless connection at the
installation site is not impaired between the
STH01 and the receiver.
- Program the transmission code in the recei-
ver.
- Other wireless devices using the same fre-
quency or working in direct proximity may
interfere with the device.