The Elcometer 138/2 Surface Contamination Kit provides materials to
collect a sample of contamination from a surface in accordance with
ISO 8502-6 (Bresle Method).
A solution is produced from the test surface using the Bresle method
and the pH, chloride concentration and iron concentration are then
measured using single-use test strips.
1 OVERVIEW
www.elcometer.com
en-2
2 BOX CONTENTS
Elcometer 135C Bresle Test Patch; x50
pH Test Strips; x100
Iron Test Strips; x100
Chloride Test Strips; x40
Syringes, 5ml (0.17 fl oz); x3
Needles (Blunt); x3
Plastic Beaker; 30ml (1 fl oz)
Transit Case
User Guide
R
3 TEST PROCEDURE
The test procedure consists of two stages:
Stage 1: Produce a solution
Stage 2: Test the solution for chloride, iron or pH as required
3.1 BEFORE YOU START
1
As the test is extremely sensitive, clean latex or nitrile gloves
should be worn during the extraction of soluble salts to prevent
contamination of the surface or sample.
2
Ensure that all parts which come into contact with the test
solution are clean; the beaker, the syringe and the needle. Rinse
with pure water if necessary.
3.2 PRODUCING A SOLUTION
1
Remove the printed protective backing
and foam centre from the Bresle
patch.
Summary of Contents for 138/2
