Setting up the touch panel
In the Touchkit Configure Utility window on the “Setting” tab you can change the touch settings described
below.
tab for other settings of the touch screen display
Figure 2.6.
the meaning of the individual functions on the tab for setting the touch screen panel
table 2.2.
Beep
sound feedback of the panel touching
Beep On Touch
sound when pressed
Beep On Release
sound when released
Frequency
tone frequency
Duration
tone length
Linearization style
option for choosing the type of linearization: 9-point or 25-point
Double click time
time interval for making a double click
Double click area
amount of movement allowed for the pressure point during double click
Normal mode
change the behavior when the panel is touched (clicking on touch or on release)
Options
specific additional setting for the touch screen display
Enable auto right click
enables right-click functionality (by prolonged pressing of a single point)
Enable touch
switching off the functionality of the touch screen panel
Enable cursor stabilization a function for stabilizing the cursor
27
Using the device
&/(-*4)