I02-244 User & maintenance manual
Version 03
(translation of the original manual)
of
TLM2000 ITS 24 V
Page
24
of
32
10
WIRING OF THE 24V STOPPERS
10.1
Connectic required to wire the electrical stoppers
•
An extender with two connectors female M12, 5 pins (straight or elbow) to connect on the
small controlling box of the stopper.
The other extremity of these cables might be with a connector M12, or wired directly,
according to the cabling required on the project
Note : each small control box is equiped on the left side by two connectors M12 Male, 4 pins.
-
The lower connector is used to pilot the stopper
-
The upper connector is used for the position detection system of the stopper
Note : the extension cables are not delivered by Elcom
PILOT connection
DETECTION SYSTEM
connection
