ELCOM Euro-2000T Alpha, User Manual

Page: 9 / 81

9
© Elcom s.r.o. Euro-2000T User manual
INTRODUCTION
ELCOM company wishes to thank you for the purchase of the
EURO-2000T cash register. Please read the instructions to become
familiar with its functions and operations before you start to operate
this equipment. Keep this manual for future use. It will help you to
solve most problems encountered in its operation.
IMPORTANT:
•
Install the cash register in a place where it will not be exposed to direct solar radiation, unusual
temperature changes (under 0° C and above 50°C) and to high humidity. Installation in such
places could may result in damage to the cabinet and electrical components as well.
•
After transporting the unit from a cold environment to a warm one and vice versa, do not switch on
the cash register within 20 minutes at a minimum or sufficient time for all components to be
conditioned to the new temperature conditions.
•
An individual having wet hands should not operate the cash register without a special wet cover.
Water could seep into the interior of the Euro-2000T and cause component failure.
•
Clean the cash register with dry, soft cloth. Never use such cleaning agents like petrol or
solvents. Using such chemicals can result in discoloration or deterioration of cabinet.
•
Avoid spilling any liquids on the cash register as they may damage its functionality. The
keyboard is to be protected with care.
•
Connect the cash register with the supplied adapter into a standard network plug. Other electrical
equipment connected in the same network circuit may cause improper functioning of the cash
register. In an environment with strong interference use the special anti-interference aids recom-
mended by the manufacturer of the cash register.
•
If the cash register malfunctions, contact your authorized dealer for service. Do not try to repair the
register yourself. Do not open the cash register!
•
Pull out the AC/DC adapter plug from its electrical connection if the device is to be fully discon-
nected.
•
During receipt printing wait until the printer has finished printing. Do not tear off the receipt during
printing. Printer damage may result.
•
Use only high-quality thermo paper. Improper ribbons may result in damage to the printer or
shorten its lifetime. When using suitable ribbons and by properly maintaining the printer, the
average lifetime is up to 25 million lines!
•
Use only the supplied AD/DC adapter for electrical connection. Use of other types of adapters
may result in damage to the cash register.
•
Use only the program recommended by your authorized dealer as well as the original intercon-
necting cable for the cash register communication with a computer. For bar code scanners use
only the connector recommended in these instructions.
•
When operating and using the cash register in other way than described in these instructions the
dealer cannot be responsible for data correctness and resulting damages.