85
Helpful advice
Complete the test by pressing
TOTAL
.
Cover close
Paper ribbon sensor test
The display will show the current state of paper ribbon present. Installing and removing paper from the sensors
changes the status depicted on the display, depending on the presence of the paper in the sensor.
Procedure for initiating the test:
Sequence of steps
Display
In the P-mode press
or
�
and then
TOTAL to enter the menu for
testing the paper ribbon sensor (P-mode – System params – Tests):
Tests
Paper sensor
Confirm by pressing
TOTAL. If the thermal ribbon is correctly inserted
in the printer, this will appear on the display:
Receipt OK
If there is an error in the thermal paper, the display will show
Receipt error
Complete the test by pressing
TOTAL
.
Receipt OK
Summary of Contents for Euro-150TE Flexy F
