ELCOM Euro-150TE Flexy F, User Manual

Page: 31 / 88

31
PROGRAMMING THE CASH REGISTER
DEPARTMENTS
note:
Prior to programming, read the „General procedure when programming in P mode“, which is located at the begin-
ning of the chapter „Programming the cash register“.
P-mode
DPT
The Euro-150TE/TX Flexy cash register allows you to program up to 20 different departments (To see what
constitutes a department and for an example, look in the introduction of this manual in the chapter „Basic
Definitions“). For Euro-150TE Flexy a department can only be programmed with a name up to 42 characters
or 21 double-sized characters in length. For Euro-150TX Flexy a department can only be programmed with
a name up to 28 characters or 14 double-sized characters in length.
1) Press the

TOTAL key to enter into the selected item menu, or to confirm (save) a programmed
value. Continue in this way until you have programmed all of the necessary parameters. Or press the

(MENU) key to switch to a menu one level higher (back)..
2) After selection of a specific parameter, a value is set either by manually entering a numerical value
(Price), entering text on the keyboard (Name) or by pressing arrow keys

or
�
(TaxRate). After
setting a correct value, confirm it by pressing the

TOTAL button; the newly programmed parameters
is then printed out.
5) Should you make a mistake when entering a numerical value or text, you can remove the incorrectly
entered character by pressing the

CLEAR key.
6) If there is no necessity to change (save) a given parameter, it is possible to pass to another item using
the arrow keys

or
�
or to leave the given menu by pressing the

(MENU) key.
7) Complete the programming by pressing the

(MENU) key.
TIP: Press

or
�
to switch between equal parameters for individual items. For example, when
programming the name of the first product item, after pressing
�
you automatically switch to programming
the name of the second product item.
Jumping to a specific product DPTs
If we want to change a parameter, for example, for the 9th DPT, this can be done as follows:
Sequence of steps Display
Set the cash register to the P-mode for programming DPT; the setting
of a price for the first product item is displayed:
0001.DPT-Name
DPT01
Enter the DPT9 button wish you want to jump to and jump to the
�
0001.DPT-Price
25.00
Cash register jumps to the programmed price for the DPT no. 09
0009.DPT-Price
0.00
Printing of programmed values
Print a value for a specific programmed parameter by pressing the

(EAN) key; print all parameters in a given
item by pressing

SCALE , and use the

VOID key to print out all active items in the given menu.