![elco Polywarm-Maxi PWB-1000 Installation And Operating Instructions Manual Download Page 2](http://html1.mh-extra.com/html/elco/polywarm-maxi-pwb-1000/polywarm-maxi-pwb-1000_installation-and-operating-instructions-manual_2377076002.webp)
Index
Section Topic Page No
2. Technical data & dimensions ………………………………....……
3. Installation .................…………………………………………....…
4. Connections ……………………………................................…....
5. Primary coils circulation ………................................………....….
6. Self cleaning flux …………………................................……...….
7. Immersion heaters …………………................................……....
8. Hard water ………………………………………………………...…
9. Unvented systems ……………………………………………….....
10. Expansion vessels pre-charge pressure …………...........….…...
11. Expansion vessel capacity …………………………..........…....…
12. Safety relief valves discharge pipes ………………..........….…...
13. Tundish positioning & discharge ………………………................
14. Electrical installation............................... …………………...........
15. Electrical connections for optional powered anode………….…..
16. Electrical connections for optional immersion heaters .……...….
17. Typical installation schematics ………………………………….…
18. Commissioning ………………………………………………..….…
19.
User instructions ………………………………………………....…
20.
Regular maintenance …………………………………………....…
Draining the cylinder &/or buffer vessel ...............……………….
21.
Easy Control Panel ………………………………………………..
22.
In compliance with Directive 2014/68/EU (PED) and the Regulations 812/2013 and
814/2013 issued by Directive 2009/125/EC (ErP - EcoDesign Requirements for Energy
Related Products) and by Directive 2010/30/EC (Energy Labelling of Products), the
technical and heat loss specifications together with the energy categories are written on
the labels/technical sheets attached to the product. Such labels/technical sheets must
be considered as an integral part of these instructions for use.
The Indirect Hot Water Cylinders have been tested in compliance with standard EN
12897. All Hot Water Storage Tanks are manufactured in accordance with Article 4.3 of
PED and must not be CE marked. However the manufacturer guarantees the
production quality in accordance with EN ISO 9001
Page
!
of
!
2
25
1. Overview & Regulations ..…..………………………………....……
3
5
14
14
14
14
14
14
15
15
15
15
16
16
16
17
19
20
22
22
21
22