elco N6.2400 G-R, Operating Instructions Manual, Page: 10 / 28

10/2010 - Art. Nr. 4200 1030 6900A 10
Assembly
Checking / assembling the combustion components
Burner A B
N6.2400 G-R 19 203
N6.2900 G-R 0 185
N7.3600 G-R 50
234.5
N7.4500 G-R 10
Assembling the combustion
components
• Check that the O-Ring J1 is in the
correct position in the gas elbow.
• Check the adjustment settings of the
ionisation probe and of the ignition
electrode as per the diagrams.
• Insert the combustion components
into the head, tighten the mounting
screws
S3 .
• Connect the ionisation cable IK and
the ignition cable ZK on the
combustion head.
• Connect the ignition cable ZK on the
ignition transformator T1 .
Important
If there is a change to the type of gas
used, for example
H or E natural gas
(G20) to L or LL gas ( G25) or vice versa,
the burner settings should be
completely overhauled.
It is not necessary to modify the
combustion head in any way.