PROGRAMMING OF THE HOURS COUNTER (SET HR_)
The hour counter will be increased when the measure of the parameter will exceed the set threshold value.
ELM-961
instruction manual
IM441-U v0.6
pag. 11
seT UP
Æ
seT Up
RESET
SET DO1
SET DO2
SET HR_
--- OFF OFF
(the visualization depends on the settings and the I/O status)
HR_ SEl VLN
HR_ SEl AMP
HR_ SEl P.f To
chose
the
parameter
HR_ SEl ACT
(see the variable list)
HR_ SEl REA
HR_ SEl APP
HR_ SEl VLL
HR_ SEL FRE
HR_ sel T°c
Set the threshold
Increase
HR_ HI
Decrease
Confirm and end of hour counter settings.
SELECT THE PARAMETER TO LINK TO THE HOURS COUNTER
From the previous setting, pressing the C key it’s possible to set the hours counter: the message SET HR_ appears on
the F display. Press the A key to define the parameter to link to the hours counter. Press more time the B key to select
the parameter and the A key to confirm it.
SET THE THRESHOLD
Subsequently it’s necessary to set the threshold using the B (to increase) and C (to decrease) keys. Confirm with A key.
I/O INFO PAGE
After the hour counter set, the I/O info page appears in F displays: on the second part (L2) the status of the first digital
output (DO1), on the third part (L3) the status of the second digital output (DO2).
The visualization of the status of the two digital outputs is ON if the digital output is activated or OFF if deactivated.
The status of the serial port appear on the G display when the instrument has this option. If the instrument receives data,
it displays the letter R and the number of the instrument that is in communication while if the instrument transmits data, it
displays the letter T.
VARIABLE LIST
VLN three-phase voltage
AMP three-phase current
P.F three-phase power factor
ACT
active power
REA
reactive power
APP apparent
power
VLL phase to phase voltage
FRE frequency
T°C temperature
