elco Aquatop TC Series, Operating Instructions Manual, Page: 3 / 48

3
Basic Information
Safety Notes
E
Components and piping of the cooling
circuit may never be used for transport.
E
The heat pump is fastened to the
transport pallet.
E
All electric circuits must be de-energized
before opening the unit.
E
All work on the cooling circuit must be
carried out by trained technicians who
must be familiar with and trained in the
use and handling of the coolant.
L
Never us harsh, abrasive, acidic or
chlorine-containing cleansers on the
surface of the equipment.
Safety Notes
The following notes and information are
generally used in the
operating
instructions:
L
Comply with
information
about
function and operation.
E
Always comply with and
observe all safety notes and
safety
information.
Information about the operating
instructions
of the controller
LOGON B WP
E
Setup, installation, configuration, and
initial startup of the heat pump system
must be carried out by a qualified
technician applying the relevant
statutory rules, regulations, and guide-
lines, as well as the operating
instructions.
E
The use of the heat pump must be
reported to the local utility or electric
company.
E
Do not exceed a tilt of 30° when tran-
sporting the heat pump. Avoid exposing
the heat pump to any type of moisture
or humidity.
Protect the heat pump from damage
and dirt during all construction phases.