Command
2 character command
2 digit value
Start
ST
Show number ‘01’ – ‘99’
Loop
LP
Show number ‘01’ – ‘99’
Load
LD
Show number ‘01’ – ‘99’
Stop
SP
-
Hold
HD
-
Continue
CT
-
Restart
RS
-
The playback select is used for multishow only. If no playback is selected, then playback 1 is used.
If a valid command is received, the showStore XLan will send back
OK: <send command><carriage return>.
If the received command is unusable, then the unit will send back
FAIL: <send command><carriage return>.
Ascii Examples
ST01<cr>
start show 1
3LP04<cr>
start show 4 in loop mode on playback 3 (multishow only)
Ascii Control options
RS-232
Use the setup menu (MIDI / RS-232) to select RS-232 mode and the desired speed. ASCII commands can be send
via the RS-232 port.
Telnet / TCP
Open a TCP connection, or telnet session to the unit using the units ip address and TCP port 23. ASCII commands
can now be send via TCP/telnet.
Custom Webserver
The webserver in the showstore uses files stored on the internal SD-card. A folder called /web is used as the root
of the webserver. This folder needs to be made to hold all the web pages and imaged.
To insert commands in th webserver, you’ll need add ascii-commands to hyperlinks, like
index.htm?LP01
The ascii commands are described in the manual of the showstore. It is also possible to send commands to
different internal playbacks (multishow mode) by adding the selected playback to the command.
index.htm?2LP02
A very important note: The filesystem inside the showstore does NOT handle long filenames (due to patent issues
from Microsoft). So all filenames used by the webserver should be in (old dos) 8.3 format.
General Information
CE – Product
The showStore XLan permits to the CE requirements set up by the European Community. This can be recognized
by this label on the outside of the product.
Technical Specifications:
Power:
85-264 VAC 47-440 Hz 10VA max
Dimensions
19” 1HE rack unit 483 x 44 x 150 mm
Weight
2kg
This product may only be used for controlling
dimmers and moving lights. Using the product
out of these specifications will remove all
responsibility from the supplier
