The main display will change, indicating the status of the 4 playbacks.
Each of the four parts on the display shows:
•
The playback number 1 – 4
•
Playback status (hold / single / loop)
•
Show number
•
Showname
•
Show timer
In multishow it is not possible to control it via the front panel. So control is done via triggers or ascii commands
(explained further on in the manual).
Network Opt
In network options you set the IP address options for the network interface.
Use the encoder to adjust the selected value
Press the encoder to select the next value
Press A to confirm
Press B to set the address and netmask to the default value for ArtNet
Press
to cancel the operation
Device Lock
The operations of the unit can be locked in 3 levels.
Use the encoder to change the lock setting
Press A to confirm
Press B to unlock the unit
Press
to cancel the operation
Device locking levels are:
•
Unlocked
all operations are possible
•
Write Protect
the recording and deleting of showfiles is disabled
•
Device Lock
all front panel operations are locked
To be able to enter the setup menu from main or multishow menu press and hold the encoder and next
press the
(setup) key.
Clock & Date
Set the realtime clock and date to the correct values
Press the encoder to select the next value
Press A to confirm
Press
to cancel the operation
Factory Def
Press A and B to set the configuration to the default factory settings.
Press
to cancel the operation.
File exchange
Via USB
Connect the showStore’s USB connection to your PC. The showstore will come up as an external drive. You can
now copy file to and from the showstore. If you have copied new files to the showstore, then you’ll need to restart
(power cycle) the unit.
