miniSTORE
The miniSTORE is a smaller and simpler version of the
showSTORE, using solid state non volatile memory for
storage. The ministore is limited in memory capacity. Therefor
a compression is used during recoding. The intended
application of the product is to record and playback a single
small show with a few fixtures, scanners or moving heads for
shop windows, product displays etc.
Setup
On the back panel there are 4 dip switches with the following
preset functions:
Dipswitch 1 and 2 are used for setting number of channels and
the framerate:
1 2
Frames/sec:
↑
↑
40
↓
↑
33
↑
↓
25
↓
↓
12
A show with 12 moving lights with constant fading on 16-bit
pan/tilt, CMY and dimmer will record up to 6 minutes (@
40fps).
A show with just a few changes might record up to hours.
Dipswitch 3 and 4 are used for setting the mode of operation
according to the table below
3 4
Function:
↑
↑
Normal record/play mode
↓
↑
Play only mode, recording inhibited
↑
↓
Contact play, no front panel control
↓
↓
Start up in LOOP, no front panel control
