5
Group of dimmers:
It’s possible to select multiple dimmers at one time. This can be a range, using [THRU], or separate
dimmers using [+] and [-].
ex:
[1] [THRU] [6] [ENTER]
dimmer 1 to 6 selected
[3] [+] [6] [+] [1] [0] [ENTER]
dimmer 3,6,10 selected
[1] [THRU] [6] [+] [1] [0] [ENTER]
dimmer 1 to 6 and 10 selected
[1] [THRU] [6] [–] [5] [ENTER]
dimmer 1 to 4 and 6 selected
Adding dimmers:
To add dimmers to a selection use the [+].
ex:
[+] [4] [ENTER]
adds dimmer 4 to previously selected dimmers
[+] [6] [THRU] [10]
adds dimmers 6 to 10
Removing dimmers:
Using [-] removes dimmers from the selection.
ex:
[–] [3] [ENTER]
removes dimmer 3 from selection
[–] [3] [THRU] [8]
removes dimmers 3 to 8
Clear Stage (remove all):
To clear the selection press:
[0] [ENTER]
Stepping thru dimmers:
Press [FUNC], then you can use [NEXT], [PREV], [UP] and [DOWN] for stepping thru the dimmer
channels and adjusting the total level. When finished press [ENTER].
Toggle between presets:
Press [ENTER] for switching between the current and previous setting.
Using groups
The focus hand can store up to 50 selection groups.
Recording a group
First select any number of channels in the normal way.
Next press:
[Func] [- / Store] [
/ group] number of the group [Enter]
Recalling a Group
To recall a group press for example:
[
/ Group] [1] [Enter]
Group 1 at Full
[
/ Group] [2] [+] [1] [
] [6] [@] [5]
Group 2 and channels 1 thru 6 at 50%
