RUBENS Overbed tables
EN
Elbur sp. z o.o. sp.k. 12 z 36
6.0. Using RUBENS overbed tables
Warnings
Do not put your fingers between moving parts
–
it can caused their
entrapment and inuries!
Do not load overbed table tray before locking it in the proper position
and during pushing it closer to the nursing bed.
Do not put any drinks or meals on overbed table tray when it is swiveled.
Safe working load of the overbed table tray cannot be exceeded. Do not
lean on the table
–
it can cause damage of adjustment mechanism and
lead to serious injuries!
6.1. Height adjustment and swiveling of the
overbed table tray
–
RUBENS 3
Warning
Before adjusting the height of overbed table tray, make sure there are
not any obstacles, such as furniture, window sill etc.
The biggest advantage of the
RUBENS 3 is that there is easy
possibility to adjust height and angle
level of overbed table tray.
Press a black releasing button (7),
then pull up or press down overbed table
tray to adjust height in demanded range
(release black button when the height is
good
enough
for
patient).
The
adjustment range is between 72,0
and 106,5 cm (8).
There is adjusting ratchet (9), which
allows to swivel overbed table tray
and lock it into angle position.
In order to raise a tray, pull it up and
make sure it clicks into required position
before you let it go. There are 5
positions available to achieve for
RUBENS 3 overbed table tray and the
swivel range is between
0° to
52,5
°.
In order to lower a tray it is necessary
to lift it up all the way to the stopping
point, then it can be slowly dropped.
8
7
9