PB 636 IV
Elbur sp. z o.o. sp.k.
27 of 36
CLEANING AND CARE
NO.
Components
Cleaning method
1.
Steel tubes and
coated metal parts
Use a slightly moisturized cloth and normal,
mild, not aggressive agents for cleaning
furniture
2.
Wooden and wood-
based elements
3.
Plastic components
4.
Drive units
Housings should be wiped only with
a slightly moisturized cloth
9.0. Service
Warnings
Only specially authorized technicians are allowed to carry out
troubleshooting activities and replace individual electric components.
Use the test protocol draft on pages 28 - 31 during maintenance (you
can find it also on website www.elbur.eu)
–
the subsequent technical
safety check has to be documented.
It is obligated with every maintenance to perform regular inspections,
to ensure the safe condition of the nursing bed.
If damage or malfunction is suspected, take the bed out of service
immediately and disconnect it from the power until exchange or repair
of broken components.
Contact manufacture or distributor if the exchange or repair of faulty
parts have to be made.
It is obligated to perform regular inspections, to ensure the safe condition
of the nursing bed:
•
First inspection
–
before first use;
•
Repeat inspection
–
not less than once a year and before every re-use,
•
Service inspection
–
service should be performer after every repair.
You can find the inspection protocol on the following pages, which has to
be used during services of the nursing beds.
