PB 636 IV
Elbur sp. z o.o. sp.k.
16 of 36
4.4. Hand switch
The electrical adjustment can be made using the hand
switch. Functions can be controlled by the press of the
button on keypad on the front side. The fixing bracket
on the rear of the hand switch can be used to hold it in
an easily reachable position on the nursing bed.
Operating of hand switch is described in subclause 7.1.
5.0. Accessories and spare parts
Warnings
Use only original Elbur accessories and spare parts
–
modification
of nursing beds is strictly forbidden without authorization of our
company.
It is necessary to perform specific control tests after modifying the
nursing bed to make sure that it is going to work properly.
Modification of nursing bed without authorization of Elbur company can
caused hazards for patients ad operators, for example entrapment
between side rails or inadvertent patient falls.
Accessories and spare parts can be ordered from distributor or Elbur
company. For reasons of safety, it is allowed to use only original spare parts
or accessories from Elbur sp. z o.o. sp.k. Otherwise, our company will
assume no liability for any accidents, damage, injury and risks that come
about through the use of other spare parts or accessories.
No. Accesories
Article
number
1)
Clip-on safety side rail
10170
2)
Metal safety side rail
10175
3)
Side board
10135
4)
Upholstered cover for side rails
38005
5)
Standing aid type E
10137
6)
Standing aid type H
10136
7)
Tray placed on side rails
10125
