REBLE610 Fully indoor Microwave Link
Page 44 of 52
Version 1.4
3.
Associate a transport channel number (from 1 to 10; one number can be tied to only one input at a
time).
4.
Associate a channel to be extracted (from 1 to 10; outputs can be multiple).
A button to enable E1 channel it’s available; the channel is available on connectors E and K, only if this
function is enabled.
Figure 79: Web slot interface form –Internal loop management
Internal loop management frame let the user configure the signals coming from demodulation section that
can be forwarded to the modulator section, in case of a repeater configuration. Every transport channel
present in the data stream (identified uniquely as Loop port, first column) can be enabled for the pass-
through functions and even remapped on a different transport channel.
The only limitation is the number of channels available, ten, to be shared between local inputs and loop
through signals.
Figure 80: Web slot interface form – Ethernet port management.
Ethernet port management let the user configure the Ethernet transport port.
Figure 81: Web slot interface form – Ethernet port management.
