Curaflex Nova
®
Uno/M/Z
Curaflex Nova
®
Uno/M/Z
INSTALLATION INSTRUCTIONS
Curaflex Nova
®
Gasket inserts
English
Intended use
The gasket insert Curaflex Nova
®
Uno/M/Z is especially suitable for
the sealing of several pipes and cables with a smooth surface.
Curaflex Nova
®
Uno/M/Z is hinged, to accommodate sealing pipes
and cables that have already been laid.
Please note:
• Gasket inserts are not secure points or support bearings; they are
only used for elastic sealing of pipes/cables.
• Slight axial movements of the pipes and cables are permitted.
Furthermore, fixing tabs are optionally available and can be
screwed onto the frame ring (fixing set accessory). These tabs
additionally secure the gasket insert when the pressure loads are
higher.
• Curaflex
®
gasket inserts are maintenance-free. Once correctly
installed, it is not necessary to re-tighten the bolts.
• The relevant FHRK standard (minimum seal width) can be found
on the product label.
• The applicable national regulations governing the laying and
filling of pipes and cables must be observed.
