Elba PX 96 990 AZ, Instructions For The Use, Page: 44 / 88

44
The manufacturer cannot be held re spon sible for possible inaccuracies due to printing or transcrip-
tion errors in the present booklet.
The manufacturer re serves the right to make all modifications to its products deemed necessary for
manufacture or commercial reasons at any moment and without prior notice, without jeopardising
the es sential functional and safety characteristics of the appliances.
220-240 V
PE N L
1
(L
2
)
Fig. 9.3
ELECTRICAL FEEDER CABLE
CONNECTION
To connect the supply cable:
- Remove the screw securing the cover
“ A ” on the rear of the cooker (fig. 9.1).
- Unscrew cable clamp “ D ” (Fig. 9.2).
- Connect the wires to the terminal
block “ B ” as shown in the diagram in
figure 9.3.
- Take up any slack in the cable and
secure with the cable clamp “ D ”.
- Replace the cover “ A ”.
FEEDER SPECIAL CABLE SECTION
Type “HO5RR-F”
220-240 V 50/60 Hz 3 x 0,75 mm
2
Fig. 9.1 Fig. 9.2
A
D
B