Elba PX 96 990 AZ, Instructions For The Use, Page: 33 / 88

33
plug
Fig. 8.1
The walls adjacent to the cooker
must be of material resistant to
heat.
Before installation, make sure that
the local distribution conditions
(type of gas and its pressure) and
the adjustment of this appliance
are compatible. The appliance
adjustment conditions are given on
the plate or the label.
8 - GAS SECTION
The cooker is adjusted in the factory to
operate with LPG (G30/G31 - 28/37 mbar)
Cat:
I
3+
INSTALLATION
The connection must be executed by a
qualified technician according to the rel-
evant standards.
Ensure that the room in which the cook-
er is to be installed is adequately venti-
lated, in compliance with applicable
regulations.
Connection to the gas supply pipe or
gas cylinder must be made in accor-
dance with the requirements of the
applicable regulations.
GAS CONNECTION
– Connect the cooker to the gas mains
utilizing rigid or flexible pipes.
– The connection must be executed to
the rear of appliance (left or right) (fig.
8.1); the pipe do not cross the cooker.
– The unused end inlet pipe of the cook-
er (left or right) must be closed with
the plug interposing the gasket.