background image

EN

16

clothes that bear “not machine- 

washable” labels for which hand wash 

is recommended on this program. It 

washes the laundry with very tender 

washing movements without damaging 

your clothes.

Additional programs 

For special cases, there are also extra 

programs available:

C  

Additional programs may differ 

according to the features of your 

machine.

• ECO40 

This program washes for a longer period 

at 40°C and gives the same result as the 

“Cottons 60°C” program, thus it saves 

energy. It is suitable for clothes for which 

you cannot use the “Cottons 60 °C” 

program. 

• Quick 30

This program is used to quickly wash 

(30 minutes) a small amount of lightly 

soiled cotton garments.

• Shirts

You can use this program to wash the 
shirts made of cotton, synthetic and 
synthetic blended fabrics.

Special programs

For specific applications, you can select 

any of the following programs:

• Rinse

This program is used when you want to 

rinse or starch separately.

• Pump+spin

This program spins with maximum 

possible rpm in the default setting after 

the water drains from the machine.

C

  You should use a lower spin speed

 

for delicate laundries.

Spin Speed selection

You can have your clothes spin at 

the maximum rpm selection on your 

machine by using the selection knob in 

models equipped with an rpm selection 

knob. In order to protect your clothes, 

your machine will not spin above 800 

rpm on synthetic programs and 600 rpm 

on woolens program. Furthermore, if 

you want to skip the spin cycle and take 

your clothes out, turn the rpm selection 

knob to “no spin” position. 

In machines not equipped with a spin 

speed selection knob, the machine will 

spin in the maximum possible rpm in the 

default setting of the selected program.

Summary of Contents for EWF-6560E
































Reviews: