background image

2

EN

1  Important safety instructions

This section contains safety instructions that will 

help protect from risk of personal injury or property 

damage. Failure to follow these instructions shall void 

any warranty.

General safety

• 

8 years and older children and people with 

reduced physical, sensory, and mental abilities 

as well as unskilled or inexperienced persons 

can use this appliance provided that they are 

supervised and instructed on safe use of the 

appliance as well as to the related dangers. 

Children should not play or tamper with the 

appliance. Cleaning and user maintenance 

should never be performed by children unless 

supervised by a responsible adult.

• 

Never place the product on a carpet-covered 

floor; otherwise, lack of airflow beneath the 

machine will cause electrical parts to overheat. 

This will cause problems with your product.

• 

Do not operate the product if the power cable 

/ plug is damaged. Call the Authorized Service 

Agent.

• 

Have a qualified electrician connect a 

16-Ampere fuse to the installation location of the 

product.

• 

If the product has a failure, it should not be 

operated unless it is repaired by the Authorized 

Service Agent. There is the risk of electric shock!

• 

This product is designed to resume operating 

in the event of powering on after a power 

interruption. If you wish to cancel the 

programme, see "Cancelling the programme" 

section.

• 

Connect the product to a grounded outlet 

protected by a fuse complying with the values 

in the "Technical specifications" table. Do not 

neglect to have the grounding installation made 

by a qualified electrician. Our company shall 

not be liable for any damages that will arise 

when the product is used without grounding in 

accordance with the local regulations.

• 

The water supply and draining hoses must be 

securely fastened and remain undamaged. 

Otherwise, there is the risk of water leakage.

• 

Never open the loading door or remove the filter 

while there is still water in the drum. Otherwise, 

risk of flooding and injury from hot water will 

occur.

• 

Do not force open the locked loading door. The 

loading door will be ready to open just a few 

minutes after the washing cycle comes to an 

end. In case of forcing the loading door to open, 

the door and the lock mechanism may get 

damaged.

• 

Unplug the product when not in use.

• 

Never wash the product by spreading or pouring 

water onto it! There is the risk of electric shock!

• 

Never touch the plug with wet hands! Never 

unplug by pulling on the cable, always pull out 

by grabbing the plug.

• 

Use detergents, softeners and supplements 

suitable for automatic washing machines only.

• 

Follow the instructions on the textile tags and on 

the detergent package.

• 

The product must be unplugged during 

installation, maintenance, cleaning and repairing 

procedures.

• 

Always have the installation and repairing 

procedures carried out by the Authorized 

Service Agent. Manufacturer shall not be 

held liable for damages that may arise from 

procedures carried out by unauthorized 

persons.

Intended use

• 

This product has been designed for domestic 

use. It is not suitable for commercial use and it 

must not be used out of its intended use.

• 

The product must only be used for washing and 

rinsing of laundry that are marked accordingly.

• 

The manufacturer waives any responsibility 

arisen from incorrect usage or transportation.

Children's safety

• 

Electrical products are dangerous for the 

children. Keep children away from the product 

when it is in use. Do not let them to tamper with 

the product. Use child lock to prevent children 

from intervening with the product. 

• 

Do not forget to close the loading door when 

leaving the room where the product is located.

• 

Store all detergents and additives in a safe place 

away from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for 

installation of the product. To make the product ready 

for use, review the information in the user manual 

and make sure that the electricity, tap water supply 

and water drainage systems are appropriate before 

calling the Authorized Service Agent. If they are not, 

call a qualified technician and plumber to have any 

necessary arrangements carried out.

C

  Preparation of the location and electrical, tap 

water and waste water installations at the place 

of installation is under customer's responsibility. 

B

  Installation and electrical connections of the 

product must be carried out by the Authorized 

Service Agent. Manufacturer shall not be 

held liable for damages that may arise from 

procedures carried out by unauthorized 

persons.

A

  Prior to installation, visually check if the product 

has any defects on it. If so, do not have it 

installed. Damaged products cause risks for 

your safety.

C

  Make sure that the water inlet and discharge 

hoses as well as the power cable are not 

folded, pinched or crushed while pushing the 

product into its place after installation or cleaning 

procedures.

Appropriate installation location

• 

Place the machine on a rigid floor. Do not place 

it on a long pile rug or similar surfaces.

• 

Total weight of the washing machine and the 

dryer -with full load- when they are placed 

Summary of Contents for EWF 0861 A


















Reviews: