8
6.
Automatic Cord Storage
Your system comes with an Automatic Code Storage system. Push the button at the back of the machine
and the cord is retracted automatically. The large button also allows this to be done with your
foot.(Fig.10)
Product Care and Storage
Always switch off the main switch and disconnect the AC cord from the electrical outlet before cleaning your
machine or replacing any part.
Caution:
If you use your machine for liquid suction. Make sure you first
reduce the amount of water in the tank by about half. It is also important not to
allow the tank to become too full of vacuumed liquid.
When you finish, empty the tank completely and vacuum up about one liter of
clean water to rinse clean the inside of the Flexible Hose and the Telescopic Tube.
Repeat if necessary.
To dry the inside of Hose & the Tube, detach the Water Brush, and run your
machine for a few minutes without sucking up any dirt. Wash and dry the water
brush separately.
Vacuum soapy liquid or detergent should be avoided, as this causes frothing inside
the water tank.
Caution:
While nearing the end of the retraction, hold on to the end
of the cord and guide it into the cord storage compartment. The force and
speed of the retraction may cause the plug to snap back and hit
something.