Elba ESO-G3070ST(BK), Owner'S Manual

Page: 7 / 24

4. CONNECTION OF THE APPLIANCE
4.1 Fitting on a Power Supply Cable
The appliance has to be equipped with a three-core power supply cable which is designed to
operate with an alternating current. The AC power supply should be supplied with 220-240V,
50Hz and a minimum 15A distribution circuit fuse or at least 15A distribution circuit breaker.
4.2 Connecting the Supply Cable to the Mains
Install a standardized plug corresponding to the load indicated on the marking plate. The supply
cable should be positioned so that it does not reach a temperature of more than 50
℃
with
respect to the room temperature, anywhere along its length, or protected by insulation having an
appropriate rating.
Before making the connection, check that:

The electrical safety of this appliance can only be guaranteed if the appliance is correctly
and efficiently earthed, in compliance with regulations on electrical safety.

Always ensure that the earthing is connected. If you have any doubts please contact a
qualified technician to check the connection. The manufacturer declines all liability of
damage resulting from a connection which has not been earthed properly.

Before plugging the appliance into the mains, check that the specifications indicated on
the marking plate correspond to the electrical mains system of your home.

Check that the electrical capacity of the system and sockets will support the maximum
power of the appliance, as indicated on the marking plate.

If the socket and appliance plug are not compatible, have the socket replaced with a
suitable model by a qualified technician. The latter, in particular, will also have to ensure
that the cross sections of the socket cables are suitable for the power absorbed by the
appliance.

The use of adapters, multiple sockets and /or extensions, is not recommended. If their
use cannot be avoided, remember to use only single or multiple adapters and extensions
which comply with current safety regulations. In these cases, never exceed the maximum
current capacity indicated on the single adapter or extension and the maximum power
indicated on the multiple adapter .The plug and socket must be easily accessible.
5. HOW TO USE YOUR STEAM OVEN

The first time you use your appliance, we recommend that set the thermostat to the
highest setting and leave the oven on for about half an hour with nothing in it, with the
oven door shut completely. Then open the oven door and let the air in. The odor that is
often detected during this initial use is due to the evaporation of substances used to
protect the oven during storage and until it is installed.
5