7.5 End of the program
When the program cycle has ended, the water pump will pump the boiled water back to water
tank. In this process,
you can touch the “MENU” button and return back to function interface.
When the temperature falls, the system will automatically operate for the water drainage. The
system will back to standby mode after the pumping process
7.6 Change the running program
In the process of program is running, you may click “CHANGE” button to return to the interface
of function parameters. You may edit the temperature setting, duration, start time, finish time
and heating-up phase. The program will stop temporarily until the latest entry has been enter.
Click “OK” to save and continue with the latest program.
15
