Elba EGSI-A1518, Owner'S Manual, Page: 6 / 8

6
4. Accessories instruction
 Brush
 By using the brush, the steam can easier infiltrate into the cloth.
 Before removing the brush, please switch off the power. Make sure no steam is
coming out from the steam vent and then only remove the brush from the steam
head.

Iron splint

Install the splint to the steam head; push it tightly to its position.

Hold the steam head, open the splint.

Put the cloth between splint and the steam head.

Clamp on to the collar and start to iron.

Before removing the brush, please switch off the power. Make sure no steam is
coming out from the steam vent and then only remove the brush from the steam
head.
5. Storage

Remove the water tank from the body; dump the water from the water tank.

Let the appliance dry for 5 minutes.
Warning: Do not touch the steam tube until it has cooled down.
6. Cleaning

Remove the water tank; wipe the product body with wet wiping cloth.

Open the water tank cover, dump the remaining water and wash the water tank
with clean water.