Elba Covo 668 User Manual Download Page 7

4

7

INSTALLATION  PROCEDURES

SAFETY   WARNING

HOOD MAY HAVE VERY SHARP EDGES;PLEASE WEAR 

PROTECTIVE GLOVES IF IT IS NECESSARY TO REMOVE ANY 

PARTS FOR INSTALLING, CLEANING OR SERVICING.

Step 1: 

Fix the position of the cooker hood

in accordance with the recommend-

ed height between 650mm to 700mm  

from the hob and the lower edge of 

the  hood. 

Step 2: 

According the space between the hole 

A&B,

drill 2 holes in level on the wall 

with 8mm in diameter and 60-70mm 

in depth. Press the 2 expanding tube 

provided into the holes. Tighten the 2 

wood screws of 5x60mm which 

supplied together with the hood to the 

expanding tube.Make sure it is fixed 

enough and cannot be move.Hang the 

cooker hood on the 2 wood screws,

make sure it is to be level and stable.

F

E

D

C

B

A

G

A

B

C three bottons interact.

D: When the hood is OFF, press and hold D for 3 seconds,and then press C 

     (to adjust the minute) and E (to adjust the hour) respectively,G acts like  

     a clock.On the screen, left side is hour and the right side is minute;When 

     the hood is operating, touch D to control working time of hood,1minute 

     per one touch,the longest stay ON time is 60 minutes.

E: Press E, turns on the light. Press it again to turn off the light.

F: Delay formation: when the hood is operating press F, the hood will not 

     be OFF at once, it will remain for one minute before it is OFF.

OPERATING  INSTRUCTION

MAINTENANCE

CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING 
THE FAN WHILE THE FAN IS OPERATING.
FOR THE OPTIMAL LEVEL OF OPERATION, CLEAN THE RANGE 
HOOD SURFACE, FAN, AND ALUMINIUMFILTER REGULARLY.

1. Use only mild soap or detergent solutions to clean the cooker hood
    surface. Dry surfaces using soft cloth.
2. Using a stainless steel cleaner to bring the glow back into a stainless 
    steel finish.

10mm

6

5

0

-7

0

0

m

m

Wood Screw

5x60

Expanding  Tube

Hook

243mm

3

6

2

m

m

B

A

A: Touch  A , the fan runs at the low speed. Press it again, the fan turns off.

B: Touch B, the fan runs at the mid speed. Press it again, the fan turns off.

C: Touch C, the fan runs at the high speed. Press it again, the fan turns off 

Summary of Contents for Covo 668









Reviews: