3
8
2. Install the cooker hood right above the hob.The recommended distance
between the hob and the lower edge of the cooker hood is minimum
650mm and maximum 700mm. (Fig. 2)
3. In order to get the optimum performance, do not elongate the exhaust
pipe too long, and try to make the bend of exhaust pipe less and biggest,
ensure the connection is airproof.(Fig. 3)
4. After hanging the unit on the wall, ensure the hood is level and vertical.
(Fig. 4)
6
5
0
~
7
0
0
m
m
Fig.1
Fig.2
5. The air outlet must not be connected to chimney flues or combustion gas
ducts. The air outlet must under no circumstances be connected to venti-
lation ducts for room in which fuel-burning appliances are installed.
Fig.3
4. Clean the motor fan and other inside parts once half year or according
to use by QUALIFIED PERSON.
5. DO NOT cleaning motor with water or other liquid.
1. Take out the filters.
2. Loose the wire insert
and power supply wire.
3. Loose earth wire.
4. Loose blower fixed
screws.
5. Take out the blower assembly.
Motor fix cover
Fan
Charcoal filter
Fan fixed screws
Blower assembly
Wire inset
Power supply
wire
Earth wire
Blower fixed screws
CLEAN THE BLOWER ASSEMBLY
6. Take out the charcoal filter like arrowhead
’
s direction( if you have
installed charcoal filter).
LEVEL
VERTICAL
Fig.4
LEAN
LEAN
8. Use hexangular screwdriver to loose the blower fix screws.
9. Take out the fan.
7. Take out the motor fix cover like arrowhead
’
s direaction.
3. Clean the aluminium filter once a week or according to use status.
Press the buckle of the aluminium filter slightly, take off the aluminium
filter wash them by Dishwashel or you can put it into warm soapy
water using mild detergent, wipe the aluminium filter with soft brush.
Replace the filter after it is dry.
