36
Descriptions and illustrations in this booklet are given as simply indicative.
The manufacturer reserves the right, considering the characteristics of the models described here,
at any time and without notice, to make eventual necessary modifications for their construction or
for commercial needs
.
Fig. 5.1
A
F
Fig. 5.2
220-240 V
PE
N
L
1
(L )
2
Fig. 5.3
CONNECTION OF THE POWER SUPPLY CABLE
Unhook the terminal board cover by inserting a screwdriver into the two hooks “A”
(fig. 5.1).
Open the cable gland by unscrewing screw “F” (fig. 5.2), unscrew the terminal screws
and remove the cable.
The new supply cable, of suitable type and section, is connected to the terminal board
following the diagram fig. 5.3.
FEEDER CABLE SECTION
220-240 V
3 x 1,5 mm
2
(type HO5RR-F)
