background image

2

Dear Customer,

 

Thank you for having purchased and given your preferen-

ce to our product.

The safety precautions and recommendations reported 

below are for your own safety and that of others. They will 

also provide a means by which to make full use of the fea-

tures offered by your appliance.

Please preserve this booklet carefully. It may be useful 

in future, either to yourself or to others in the event that 

doubts should arise relating to its operation.

This appliance must be used only for the task it has 

explicitly been designed for, that is for cooking fo-

odstuffs. Any other form of usage is to be considered 

as inappropriate and therefore dangerous.

The manufacturer declines all responsibility in the 

event of damage caused by improper, incorrect or illo-

gical use of the appliance.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN AC-

CORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as 

urban waste. It must be taken to a special local authority differentiated 

waste collection centre or to a dealer providing this service. 

Disposing of a household appliance separately avoids possible negative 

consequences for the environment and health deriving from inappro-

priate disposal and enables the constituent materials to be recovered 

to obtain significant savings in energy and resources. As a reminder of 

the need to dispose of household appliances separately, the product is 

marked with a crossed-out wheeled dustbin.

DECLARATION OF CE CONFORMITY

This cooking hob has been designed, constructed, and marketed in compliance with:

• 

Safety requirements of the EU Directive “Low voltage” 2006/95/EC;

• 

Safety requirements of the EU Directive “EMC” 2004/108/EC;

• 

Requirements of the EU Directive 93/68/EEC.

Summary of Contents for 345-004

















































Reviews: