13
PROGRAM FOR AUTOMATIC
SWITCHING OFF OF ONE COOKING
ZONE
This function permits to set a timer from “
1
”
to “
99
” minutes for automatic turning
OFF
of one cooking zone only.
Note:
It is not possible to set this program
for all the cooking zones.
With the touch control switched
ON
:
•
Press the timer keys or ; a beep
sounds and the timer display shows
“
00
”. The displays of the cooking zo-
nes show “
” (timer).
•
Within 10 seconds, select the cooking
zone to be programmed by using the
cooking zone keys or ; a beep
sounds and the led next to the heater
display start blinking.
•
Set the disired power level by using
the cooking zone keys or ; the
led next to the heater display is stably
lit (not blinking).
•
Within 10 seconds, set the timer by
using the timer keys or to in-
crease or reduce the value (when tou-
ching the keys, the led next to the he-
ater display is blinking). If the selected
time is “
00
”, the timer is switched off
automatically after 10 seconds.
•
The countdown starts 10 seconds af-
ter the last selection. The time can be
changed at any time by using the timer
keys; the countdown stops and then
the timer changes the stop time.
Now the program for automatic switching
off is complete.
At the end of the countdown the cooking
zone will switch off automatically, an acou-
stic signal (beep) will sound (for one minute
only), “
00
” will flash on the timer display
and the led next to the heater display will
blink.
Press any button of the touch control to re-
set the timer.
Note:
The program for automatic switch off
can be cancelled at any time by resetting
the timer to “
00
”).
OR
OR
OR
