ELAUT Big One X-treme, Manual

Page: 15 / 127

Building X-treme Big One
10 Document versie: V1.1
²
•
Once the “control casing” is at its position we can now start with the cabling inside the
“control casing”.
•
The following cables are now available:
o
Powercables (3x) for the RGB controller boards RGB_2 > RGB_4.
o
Mains cable for the TV
•
These cables will be guided through the cable guides which are situated at the door (wooden
panel B6) and at the bottom of the right frame F3 and back frame F2..
•
You’ll notice that the RGB controller boards power cables have a different length.
•
The shortest will be guided up to the RGB_2 controller board and connected.
•
The longest will be guided up to the RGB_4 controller board and connected.
•
The remaining will be guided up to the RGB_3 controller board and connected.
•
See picture below that shows way to connect the power connector.