ELAUT Big One X-treme, Manual

Page: 14 / 127

Building X-treme Big One
9 Document versie: V1.1
²
•
To fix the “control casing” properly the toggle latch can be adjusted by turning the latch (see
previous picture).
•
The grounding wire (see previous picture) from the “controls casing” should be then
connected to the grounding lip of the frame F4.
•
We will now fix the wooden floorplate labelled “B6” on the door entrance as shown in picture
below. This plate should be equipped with a cable guide at the bottom. The mounting holes in
the wooden plate are already present. We only need to drill holes of 3.6mm in the aluminium
frame at these locations once the plate has been well positioned.