©Elation Pr
o
fessional® - www.elationlighting.com - TVL1000 II Instruction Manual Page 14
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to create unique programs tailored to
your individual needs.
1. The TVL1000 II has three DMX channel modes. To set the channel
mode see page 10. See page 15 for the DMX modes & traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 10 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Manual Mode:
This mode allows the user to adjust the color intensity
to create their own desired color temperature.
1. Press the MENU button until
“
MANU
” is displayed, and press
ENTER.
2.
Follow the instructions on pages 10-11 to operate this mode.
3. You can also use the Color Adjust Knob and Dimmer Knob to
manually create your desired color temperature. Please see the
Control Panel on page 8.
TVL1000 II
Universal DMX Control
©Elation Pr
o
fessional® - www.elationlighting.com - TVL1000 II Instruction Manual Page 13
TVL1000 II
System Menu
•
CHAR
(Charging) - When this is selected you are able to charge
or stop charging the battery. When a power cable is connected
and “ON” is selected, the battery is now being charged. To stop
charging, select “OFF”.
•
LOAD
(LED On or OFF) - This will let you blackout the LED while
charging. Select “OFF” to blackout the LED or “ON” to stop the
LED blackout.
•
STAT
(Charge Status) - This will let you check the battery status.
3. Press ENTER to confirm your setting and exit.
TEST
- This function will run a self test program.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test program. To stop the self
test press either the MENU or ENTER button.
FHRS
- With this function you can display the running time
of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the MENU button until “
VER
” is displayed, press
ENTER.
2. The display will show the software version.
