10. Tap UP/DOWN button to scroll the
GoScene## from 01~99.
11. In ArtNET Failed menu, you can
tap ENTER button to save your set
or use ESC button to exit without
record.
9. When selected GoScene##, tap >> button
to activate cursor.
8. In this page, tap UP/DOWN button to
scroll Off, Hold,
7. Use >> button to select and tap
ENTER button to enter ArtNET Failed
menu. This menu contains ArtNET Failed
Off, Hold, Off After 10min, ArtNET fail DMX
and GoScene##.
ENTER
MENU
ESC
ENTER
MENU
ESC
ENTER
MENU
ESC
ENTER
MENU
ESC
ENTER
MENU
ESC
Operation Guide
ArtNET Failed
Off
ArtNET Failed
Off
Off After 10min, ArtNET
Fail DMX or GoScene##.
ArtNET Failed
GoScene01
ArtNET Failed
GoScene99
ArtNET Failed
GoScene99
7) SETUP
-18-
Technical Specification
Power Requirements
Voltage: 120V AC
Frequency: 60Hz
All RMD-1220 Rack Mount Dimmers must be grounded for safety use.
Dimming Capacity
Each pack contains twelve dimmers each with a Maximum load of 20A(4.6kW)
per dimmer-total 55.2kW per dimmer pack.
Dimmer output Connections
RMD-1220 dimmer pack is available in terminal strips connector.
Control Inputs
USITT DMX512(1990) multiplexed digital control and ArtNET(Ethernet protocol)
are available
Physical
Length: 482mm
Width: 501mm
Height:
89mm
Weight: 21.5Kg(approx.)
DMX Output
Via 3Pin/5Pin XLR female XLR socket.
DMX Input
Via 3Pin/5Pin XLR male XLR socket and ArtNET(Ethernet protocol).
Improvements and changes in specifications and design to this manual and unit may
be made at any time without prior notice.
-3-
Environment(Operating)
Temperature:0 C~37 C
Relative humidity:60%~90%
Condensation level: Zero
RMD-1220 is suitable only for use in a dry, internal environment.
