Elation PRB201, User Manual

Page: 28 / 49

28
SYST E M M E N U
EDIT PROGRAM - Record Controller - Working With Built - In Programs
A Primary unit can send up to 3 different data groups to the Secondary units, i.e. a Primary unit
can start 3 different Secondary units, which run 3 different programs. The Primary unit sends
the 3 program parts in a continuous loop.
The Secondary unit receives data from the Primary unit according to the group which the
Secondary unit was assigned to. If e.g. a Secondary unit is set to “
Secondary 1 ” in the menu
“ Set to Secondary ”, the Primary unit sends “ Auto Program Part 1 ” to the Secondary unit. If
set to “ Secondary 2 ”, the Secondary unit receives “ Auto Program Part 2 ”.
To start an Auto Program proceed as follows:
1. Secondary Setting
• Select “ Function Mode ”.
• Press ENTER to confirm.
• Select “ Set to Secondary ”.
• Press ENTER to confirm.
• Select “S econdary 1 ”, “ Secondary 2 ” or “ Secondary 3 ”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
• Select “ Function Mode ”.
• Press ENTER to confirm.
• Select “ Auto Program ”.
• Press ENTER to confirm.
• Select “ Primary ” or “ Alone ”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.