Elation PLATINUM WASH ZFX PRO, Manual

Page: 28 / 56

Platinum Wash Zfx Pro
™
©Elation Professional® 28
Platinum Wash Zfx Pro
™
and return to the main menu. This function is “ON” by default.
8.3.5 Temperature Set C/F – This function changes the temperature the unit will display
from either Celsius or Fahrenheit. Fahrenheit is set as default.
8.3.6 Initial Status – This function allows a user to create and assign a custom “Home
Position” into the fixture. Adjusting the Pan and Tilt values then locking those values into
the fixture’s internal memory creates the new “Home” position.
8.3.7 Wireless DMX
This section will control the functionality of the built-in wireless DMX receiver. See page
37 for more information on operating this fixture via Wireless DMX.
8.3.8 Reset Default – This function is used to restore the fixture’s original factory
settings. All settings will be set back to the default values (shaded). Any edited scenes
will be lost.
8.4 Reset Function: The reset function returns a motor to the “Home” position. There are
several reset functions available on this fixture. The list below details the functionality of
each available selection.
8.4.1 Reset All: This function will reset all internal motors to the home position.
8.4.2 Reset X and Y: This function will only reset the pan and tilt motors to the
home position.
8.4.3 Reset Zoom: This function will reset all zoom motors.
8.5 Effect Adjust:
8.5.1 Test Channel – This menu function allows the user to select each individual fixture
channel and test the functions independently from a DMX control board.
8.5.2 Manual Control – This function is designed for testing and manual control. When
activated this function will center the pan and tilt motors, open the shutter, and bring
the dimmer to 100%. The pan and tilt function will still operate if the fixture needs to
be positioned to a flat clear surface.