Elation PLATINUM WASH ZFX PRO, Manual

Page: 12 / 56

Platinum Wash Zfx Pro
™
©Elation Professional® 12
Platinum Wash Zfx Pro
™
wireless DMX mode. Red indicates wireless DMX mode is off, green indicated wireless
DMX is active. Flashing red and green indicated wireless mode is active but the unit is
not received a wireless signal.
13. Wireless Antenna – This antenna works with the built-in wireless DMX receiver. The
built-in wireless DMX system works with any Elation wireless system or any compatible
“EWDMX” system.
14. 3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3- pin
XLR jack.
15. 3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the
next fixture in the DMX chain via a female, 3-pin XLR jack.
16. 5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin
XLR jack.
17. 5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the
next fixture in the DMX chain via a female, 3-pin XLR jack.
18. Power Switch – Controls main power to the unit.
19. Power Cord – Plug into an appropriate power outlet to provide main power to the
fixture.
20. Fuse Holder Assembly – This assembly houses the 5amp GMA safety fuse. Always
replace the fuse with an exact match unless otherwise specified by an authorized Elation
Service Technician. Using a fuse other than that specified could seriously damage the
unit and will void your manufactures warranty.