Platinum Spot LED Pro™
Platinum Spot LED Pro™
©Elation Professional, Los Angeles Ca.
38
www.ElationLighting.com
of 64 scenes. Keep in mind that a scene can only be access when it is stored inside one of
the 10 available programs. Follow the procedure below to build an internal program:
•
Access the main menu and toggle to “Edit Programs” which is menu function 8.
•
Then tap the “ENTER” button and toggle to “Program 1.”
•
When you get to the “Program 1” function tap the “ENTER” button. The screen will
then change to Edit Steps 01. Use the “UP” and “DOWN” buttons to toggle through
the scenes created in “Step 1.” Press the “ENTER” button to add a scene to the
program. Tapping the “Enter” button will automatically lock the selected scene into
the programs’ memory. Repeat the process until all the desired scenes have been
added to the program. Each program can store a maximum of 64 scenes.
• To test the program access “Program Test” in the “Program Edit” menu function.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
•
Access the main menu and use the “Up” and “Down” to toggle to “Function Mode”
and tap the “Enter” button.
•
In the next screen select “Auto Program” and tap the “Enter” button.
•
There are now two selections, “Master” and “Alone.” Select “Master” when running
multiple fixtures in a master/slave configuration. See section 11.2 “Master/ Slave
Operation” on page 37 for proper set-up instructions. Select “Alone” when running a
single fixture or when multiple fixtures in stand-alone mode. See section 11.1
“Stand-Alone Operation” on page 37 for proper set-up instructions.
