Platinum Spot LED Pro™
Platinum Spot LED Pro™
©Elation Professional, Los Angeles Ca.
20
www.ElationLighting.com
8. FIXTURE MENU
On-Board System Menu:
The Platinum Spot LED Pro™ comes with an easy to navigate,
full color system menu. This next section will detail the functions of each command in the
system menu.
LED Control Panel:
The control panel located on the base of the fixture allows you to
access the main menu and make all necessary adjustments to the
Platinum Spot LED
Pro™.
During normal operation, tapping the “
MODE/ESC
” key once will access the fixture’s
main menu. Once in the main menu you can navigate through the different functions and
access the sub-menus with the
Up
and
Down
buttons. Once you reach a field that requires
adjusting, tap the
ENTER
button to activate that field and use the
UP
and
Down
button to
adjust the field. Tapping the
Enter
button once more will confirm your setting. Once a
setting is saved the display will briefly readout
OK
to confirm a new setting has been made
and locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the
MODE/ESC
button.
MODE/ESC Button -
To access the main menu locate the
MODE/ESC
button
on the front
of the unit. Press this button to activate the system menu. Tap the UP button until you reach
the function you wish to change. When you reach the function you wish to change tap the
ENTER
button once to select that menu function
.
When a function is selected, use the
UP
or
DOWN
button to change the function. Once your changes are made tap the
ENTER
button yet again to lock the change in the system menu. To exit without making any
changes tap the
MODE
/
ESC
button.
The fixture contains a rechargeable battery back-up system that stores all setting and also
allows the menu to be accessed when the fixture is not connected to power. To access the
menu via battery power, press and hold the DC switch button for two seconds, this will
activate the menu. The display will automatically turn off approximately one minute after all
menu commands are completed.
