w w w . e l a t i o n l i g h t i n g . c o m
23
PLATINUM SEVEN™ User Manual
EDIT PROGRAM – Record Controller – Working With Built-In Program [continued]
Example:
Program 2 includes scenes: 10, 11, 12, & 13
Program 4 includes scenes: 8, 9, & 10
Program 6 includes scenes: 12, 13, 14, & 15
Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time segments. (See diagram below)
WHITE BALANCE SETTING
This feature provides the ability to individually adjust the maximum dimmer intensity
for each LED color (Red, Green, Blue, White, Amber, Cyan, U.V.) and store these
values as a White Balance preset. This can be a useful tool when the output intensity
of a group of same model fixtures with varying usage times, needs to be calibrated
to match as much as possible. Once a new White Balance preset is saved to the
fixture, the maximum dimmer intensity values cannot be changed until the White
Balance preset is updated, erased or restored to the factory default setting.
1.
Make sure all channels are set to zero (0), then set the
EDIT and SAVE WHITE
BALANCE ENABLED
channel (CH24 in Basic Mode, CH31 in Stand Mode, CH40 in
Extend Mode) to DMX value of (91-93).
2.
Set the
EDIT a New WHITE BALANCE Setting
channel (CH22 in Basic Mode, CH29 in
Stand Mode, CH38 in Extend Mode) to DMX value of (190-254).
3.
Adjust each LED color channel to the desired intensity level (0-255).
4.
Set the
SAVE a New WHITE BALANCE
channel (CH22 in Basic Mode, CH29 in Stand
Mode, CH38 in Extend Mode) to DMX value of (255) to save the new preset.
5.
To save a new White Balance preset, repeat steps 1-4 above.
