Elation PLATINUM BX User Manual Download Page 7 | Manualshive

Page: 7 / 51

background image

w w w . e l a t i o n l i g h t i n g . c o m

7

PLATINUM BX™ User Manual Ver. 1

S A F E T Y I N S T R U C T I O N S

The

PLATINUM BX

™

is an extremely sophisticated piece of electronic

equipment. To guarantee a smooth operation, it is important to follow the
guidelines in this manual. The manufacturer of this device will not accept
responsibility for damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.

This device falls under

PROTECTION CLASS 1

. It’s essential this device be

grounded properly. Only qualified personnel should perform all electrical
connections.

KEEP THIS FIXTURE AWAY FROM RAIN AND MOISTURE!

UNPLUG POWER BEFORE SERVICING FIXTURE

NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE
SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK

For proper operation, follow the

Installation

guidelines described in this manual. Only qualified

and certified personnel should perform installation of this fixture and only the original rigging parts

(brackets) included with this fixture should be used for installation. Any modifications will void the

original manufactures warranty and increase the risk of damage and/or personal injury.

Never look directly into the light source of this fixture to prevent risk of injury to your retina, which

may induce blindness. Those suffering from

EPILEPSY

should avoid looking directly into the light

source of this unit at all times.

The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between

this fixture and other devices or a wall for proper cooling.

Always disconnect from main power source before performing any type of service and/or

cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by

tugging the wire portion of the cord.

Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If

the power cord is damaged, replace it immediately with a new one of similar power rating.

«
...
5
6
7
8
9
...
»

Summary of Contents for PLATINUM BX




















































Reviews:

No comments

Related manuals for PLATINUM BX

Brand: NEC Pages: 44

NI VISION PCI-8254R

Brand: National Instruments Pages: 13

NI VISION PCI-8254R

Brand: National Instruments Pages: 16

Brand: National Instruments Pages: 10

Brand: National Instruments Pages: 39

Brand: National Instruments Pages: 65

Brand: haacon Pages: 59

Brand: Tanco Pages: 112

Brand: Parkside Pages: 2

Brand: Park House Healthcare Pages: 12

Brand: EFX Pages: 2

Brand: Osram Pages: 4

Brand: Aspect Medical Systems Pages: 104

Brand: Feniex Pages: 5

Brand: Milestone Pages: 64

Brand: Billy Goat Pages: 14

ARIEDO HDC 300W

Brand: GSi Pages: 28

Brand: Nippon Genetics Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands