Elation PIX301, User Manual

Page: 11 / 24

INSTALLATION
CLAMP MOUNTING
This device features a mounting clamp attachment point in the middle of both the top face and the
bottom face, as well as a built-in safety cable attachment point in the corner of the device near the
Power In port (see the illustration below). When mounting the fixture to a truss or any other sus-
pended or overhead installation, be sure to secure an appropriately rated clamp (not included) to the
clamp attachment point and attach a separate SAFETY CABLE of the appropriate safety rating to
the safety cable rigging point.
ALWAYS ATTACH A SAFETY CABLE WHENEVER
INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THAT THE FIXTURE
WILL NOT FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working
load limits, understanding the installation material being used, and periodic safety inspection of all
installation material and the fixture itself. If you lack these qualifications, do not attempt to perform
the installation yourself. Improper installation can result in bodily injury.
11