Introduction:
Thank you for purchasing the Multi-Data/Pak by Elation Professional.
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of this
unit. The Multi-Data/Pak is a unique DMX to Analog and MIDI to Analog
converter. This unit has been tested at the factory before being shipped to
you, there is no assembly required.
Customer Support:
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit
to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself, doing so will void your manufactures warranty. In the unlikely event
your unit may require service please contact your nearest Elation dealer.
Do not discard the shipping cartoon in the trash. Please recycle when ever
possible.
Conformity:
This product complies to EN 50081-1/EN55022 pr EN55103-1 (EMC emission)
and EN 50081-1/EN 61000-4-2 pr EN 55103-2 (EMC immunity).
Multi-Data/Pak Instruction Manual Page 2
Voice:
(323) 582-3322
Fax:
(323) 582-3108
E-mail:
Elation Professional provides a customer support line, to provide
setup help and to answer any question should you encounter
problems during your setup or initial operation. You may also visit
us on the web at www.elationlighting.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m.
To 5:00 p.m. Pacific Standard Time.
Multi-Data/Pak Instruction Manual Page 7
Chase Mode:
To activate the unit's chase function, press the CHASE button."CHAS" will
be displayed in the LED display indicating chase mode has been activated.
The unit will run a 72 channel chase until the function is turned OFF.
Changing the output signal voltage:
The unit is capable of sending an analog output signal of +(-)10, +(-)12, +(-)15
volts. Determine the voltage your pack requires and change this setting to the
required output voltage. The unit's default output is +10 volts. To change the
output level, do the following.
1. For 10 volts, flip dip switches 1 and 4 to the ON position.
2. For 12 volts, flip dip switches 1 and 3 to the ON position.
3. For 15 volts, flip dip switches 1 and 2 to the ON position.
Specifications:
Power Input:
AC 120V~50/60Hz, 1A
Fuse:
F1A 250V 5x20mm
DMX to Analog:
Maximum of 72 channels
Analog Output:
+(-)10V/ +(-)12V/ +(-)15V
Dimensions:
483x125x44mm(19"x5"x1.75")
Weight:
1.3 Kg/ 2.5 Lbs
